Hardware
HP Procurve 2810 Switch Setup
Using VLANs for Failover/Disaster Recovery
A recent project at work required me to implement a couple of switches with VLANs. I decided that I would be able to include a failover/disaster recovery setup with two VLANs and two switches. Just to refresh anyone about my project; it is a Microsoft Windows 2003 Server (R2) webfarm with [...]
Setting up two Cisco ASA 5510s - Active/Passive
Part of the project for doublepositive was to setup everything so that if one piece of hardware failed a backup would be in place and able to handle the failure. While spec’ing the requirements for this project I looked at the 5505 and the 5510s. Both are on the lower end of as far as [...]